Coordinates tool

Latitude longitude finder

Click, search, or GPS to read DD, DMS, DMM, and geohash.

Short answer

Click anywhere, search a place, paste coordinates, or tap Use GPS. The tool prints the point in six formats you can copy: decimal degrees, degrees-minutes-seconds, degrees and decimal minutes, UTM, geohash, and plus code.

How many decimal places you need

DecimalsLatitude stepLongitude step at 39.7° N
111,103 m8,572 m
21,110 m857 m
3111 m86 m
411 m8.57 m
51.11 m0.86 m
60.11 m0.09 m
Ground size of the last decimal place, on the WGS84 ellipsoid at Denver's latitude.

How to use it

  1. Click the map where you want coordinates. Zoom in first for precision.
  2. Or search a place, tap Use GPS, or paste coordinates in any common format into Paste coordinates.
  3. The card lists the point as decimal degrees, degrees-minutes-seconds, degrees and decimal minutes, UTM, a nine-character geohash, and a plus code.
  4. Click a value to copy it to your clipboard.

The six formats

DD is decimal degrees, the format most software wants. DMS splits each degree into 60 minutes and each minute into 60 seconds. DMM keeps degrees and decimal minutes, the usual format on marine and aviation GPS units.

UTM gives meters east and north within one of 60 zones. Geohash encodes the point as a short string where each extra character narrows the cell. Plus codes are Google's open location codes, which work as addresses where streets have no numbers.

Precision you can trust

Six decimal places in DD is about 11 centimeters of latitude, much finer than a phone's GPS, which is usually good to a few meters in open sky. A click on a web map is only as precise as the zoom level. Zoom in before clicking if you need a point on a specific building.

The decimal places guide covers how many digits to keep for different jobs.

Datum

All values are on WGS84, the datum used by GPS and every major web map. Older US paper maps may use NAD27, which can put the same spot tens of meters away or more. If numbers from an old map do not line up, the datum is the first thing to check.

Sharing a location

To send someone a spot, copy the decimal degrees and paste them into a message. Most map apps turn "39.739, -104.985" into a tappable location. For a spoken or written address where streets have no numbers, a plus code is shorter and easier to read aloud.

Questions people ask

Which format should I send someone?

Decimal degrees with latitude first, such as 39.739, -104.985. Every map app reads it.

Is GPS on a phone accurate enough?

Usually to a few meters outdoors. Indoors and between tall buildings it can be much worse.

What datum are the coordinates on?

WGS84.

Sources and data as of

Data as of: computed on the WGS84 ellipsoid.

  1. 01Open Location Code (plus codes)
  2. 02Photon geocoder (OpenStreetMap data)

How every number is computed: methodology. Spotted a wrong figure? Report an error.